Storwize First Time Installation Step1

Now, i have a v7000

First you need to download and copy the tool to your USB drive, pls be careful your USB drive should be formated FAT32, if you format NTFS like me V7000 can not write down the response file and you start to hate from such process, be careful ….

V7000 Initial Tool Link

Execute it and you will see the configuration window like below, choose required one, my system is block because of this i will choose first one

Set the ip informations want to assign

Now, interesting need to be remove the usb drive and go to the behind of Storwize and plug the USB there and lets see the LEDs behind flashing and stopping🙂 very funny

Pls click finish and remove the USB drive, don’t think that which port to plug, just one them

You will see that a file which name is satask.txt create when you look inside you will see the line below

satask mkcluster -clusterip 10.110.1.20 -gw 10.110.1.1 -mask 255.255.255.0

Because of V7000 do not have a Front Panel like on SVC then need to do it , but instead of COM port or such other i think its a good way to do.

Not: if you execute the tool again , do something or not , tool delete the initial file and need to reconfigure it.

if everything is okay then you will have satask_result.html file, if inside there is no error message out then everything should be okay.

try to access v7000 like https://10.110.1.20(replace it with your ip)

After login set the service ip first or use again initial utility to set it. Service mode are really useful because my v7000 is demo and i couldn’t configure v7000 with initial tool because its pre-configured and because of some error on system my all requests redirected to https://10.110.1.20/service

Default password is passw0rd

via service; you can create the cluster , change the node mode like candidate , update the firmware , re-install , collect the logs bla bla …

IBM documents is very well i just want to indicate USB Format issue and if you have demo system instead of use initial tool use service mode to create cluster and upgrade or re-install the system

Pls contact me if something wrong or you are looking other then what i wrote
VM

 

Posted on 13/05/2012, in HowTo, V7000(Storwize) and tagged , , , , , , , , . Bookmark the permalink. Leave a comment.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: